Menu

Machines

 

 

 

K2

K2 is designed for the production and repair of large parts, boasting an impressive cubic build space along with extreme material flexibility, open-atmosphere operation, and low power consumption.

 

 

Machine Specifications:

  • Table Size: 86.6in x 43in
  • Build Volume: 82.68in x 43.30in x 39.37in
  • Cubic Build Space: 81.6ft³
  • Overall Dimensions: 20.5ft x 15.3ft x 14.5ft
  • Typical Power in Operation: 10-20A
  • Build Material: Solid Metal Bar
  • Material Range: Wide Variety of Metals
  • Operation: Open Atmosphere

L3 MELD machine for 3D printing of fully dense parts with forged properties in aluminum, magnesium, steel, inconel, copper, titanium in open airL3

L3 offers a generous workspace and build volume for manufacturing with increased access for fixturing. This machine offers a tremendous increase in production capability without requiring a larger footprint on the manufacturing floor.

 

 

 

 

 

 

Machine Specifications:

  • Table Size: 51in x 23in
  • Build Volume: 45in x 23in x 23in
  • Cubic Build Space: 14.2ft³
  • Overall Dimensions: 10ft x 8ft x 13ft
  • Typical Power in Operation: 10-20A
  • Build Material: Solid Metal Bar
  • Material Range: Wide Variety of Metals
  • Operation: Open Atmosphere

B8 Wireframe

 

 

 

B8

B8 offers extreme material flexibility, with freedom of choice for acquisition of materials. The B8 model uses solid bar without waste, and raw material costs are minimal as compared to powder and wire-based processes.

 

 

Machine Specifications:

  • Table Size: 42in x 18in
  • Build Volume: 36in x 12in x 12in
  • Cubic Build Space: 3ft³
  • Overall Dimensions: 10ft x 11ft x 11ft
  • Typical Power in Operation: 10-20A
  • Build Material: Solid Metal Bar
  • Material Range: Wide Variety of Metals
  • Operation: Open Atmosphere

The MELD CD-14 System enables users the ability to integrate the MELD deposition process onto an existing machine platform. The MELD CD-14 System is comprised of a MELD CD-14 mounted assembly, Electrical Cabinet, and HMI.

 

 

CD-14

The MELD CD-14 System enables users the ability to integrate the MELD deposition hardware and control system onto an existing machine platform. The MELD CD-14 System is comprised of a MELD CD-14 mounted assembly, Electrical Cabinet, and HMI.

 

 

Machine Specifications:

  • Table Size: n/a
  • Build Volume: n/a
  • Cubic Build Space: n/a
  • Overall Dimensions of Mounted Assembly: 32.2in x 29.2in x 83.8in
  • Typical Power in Operation: 10-20A
  • Build Material: Solid Metal Bar
  • Material Range: Wide Variety of Metals
  • Operation: Open Atmosphere

Custom Machines

Unlike traditional processes, MELD is solid-state and yields fully-dense products with near-wrought properties, reduces distortion, and saves time and expense as compared to processes requiring secondary steps to achieve full density or improved properties. With high deposition rates, large parts can be fabricated rapidly for evaluation of new materials and new geometries.

MELD increases capability by allowing manufacture of functionally-graded multi-material parts or addition of material to non-weldable parts.

Machines can be customized to meet your size and geometry requirements.

Request more information about machines, parts, and services here